Description
My Neighbor Totoro Acrylic 3D Wall Decor Stickers
Material: AcrylicDimensions: 2 sizes48.5 x 55 cm66.2 x 75 cm
Attention:For manual measurement, please allow a 0.1-2 cm error.(1 cm=0.39 inch)Colors on your computer monitor may differ slightly from actual product colors depending on your monitor settings.The product is a DIY acrylic wall sticker, which needs to be placed and pasted on the wall by hand. The back comes with self-adhesive, which can be pasted directly, but it cannot be pasted on uneven or rough surfaces.
Usage notice:
1. If you are pasting on the surface of glass or ceramic tiles, because the material is relatively smooth, it is best to dry the veneer with a clean rag before pasting, so that it is easier to paste and the effect is better;
2. Some large pattern stickers may have little air bubbles after flattening. In this case, you can use a scratch card to remove the air bubbles or use a needle tip to pierce the small air bubbles and smooth them out, which will not affect the overall paste effect ;
3. If the pasted wall is damp, aging, or newly painted, it may cause the wall sticker to fall off automatically after pasting, or cause the wall to peel off. You can dry the wall with hot air from a hair dryer or wait for the paint to volatilize for a period of time and paste it later,However, the effect may vary, so please choose the pasting location carefully;
4. If you accidentally paste the wall sticker in the wrong position, you can use a small blade to gently lift off the corner of the wall sticker, tear it off, and then paste it again. This product can be reused under normal conditions, as long as it is not torn;
5. The typesetting size of DIY series products is tight. You can give full play to your creativity and freely combine and arrange shapes and positions. You can cut the patterns separately with scissors first, and be careful not to cut other similar products when cutting.
My Neighbor Totoro Acrylic 3D Wall Decor Stickers
Material: Acrylic
Dimensions: 2 sizes
48.5 x 55 cm
66.2 x 75 cm
Attention:
For manual measurement, please allow a 0.1-2 cm error.
(1 cm=0.39 inch)
Colors on your computer monitor may differ slightly from actual product colors depending on your monitor settings.
The product is a DIY acrylic wall sticker, which needs to be placed and pasted on the wall by hand. The back comes with self-adhesive, which can be pasted directly, but it cannot be pasted on uneven or rough surfaces.
Usage notice:
1. If you are pasting on the surface of glass or ceramic tiles, because the material is relatively smooth, it is best to dry the veneer with a clean rag before pasting, so that it is easier to paste and the effect is better;
2. Some large pattern stickers may have little air bubbles after flattening. In this case, you can use a scratch card to remove the air bubbles or use a needle tip to pierce the small air bubbles and smooth them out, which will not affect the overall paste effect ;
3. If the pasted wall is damp, aging, or newly painted, it may cause the wall sticker to fall off automatically after pasting, or cause the wall to peel off. You can dry the wall with hot air from a hair dryer or wait for the paint to volatilize for a period of time and paste it later,
However, the effect may vary, so please choose the pasting location carefully;
4. If you accidentally paste the wall sticker in the wrong position, you can use a small blade to gently lift off the corner of the wall sticker, tear it off, and then paste it again. This product can be reused under normal conditions, as long as it is not torn;
5. The typesetting size of DIY series products is tight. You can give full play to your creativity and freely combine and arrange shapes and positions. You can cut the patterns separately with scissors first, and be careful not to cut other similar products when cutting.
Reviews
There are no reviews yet.